VECTOR Profesional Plasma Cutter C101 Pilot Arc Inveter cutting 50MM Non-HF Arc CNC
Digital Plasma cutting, DC-Plasmacutter, DC-cutter Plasma Equipment 100 A Non-HF ARC
- Garantiebestimmungen: click there to view details.
- VectorDigital product catalogue: click there to view details.
- Data sheet: click there to view details.
- Bedienungsanleitung: click there to view details.
- Technical Details: click there to view details.
- Warranty conditions: click there to view details.
Descript of VECTOR Profesional Plasma Cutter C101 Pilot Arc Inveter cutting 50MM Non-HF Arc CNC
The heavy duty plasma cutting power source.
The CUT-C101 manual plasma system is designed from the base of the full digital control system, providing excellent cutting and performance on material up to 30mm thickness. This single phase inverter based power source can easily and accurately cut through a range of materials including mild/stainless steel and aluminum. It is ideal for applications including car panels, light maintenance or fabrication and for use in the home workshop.
The CUT-C101 plasma is the largest air cooled manual system in the range. Selected with built-in CNC port, it is a perfect plasma cutting power source for CNC cutting system.
The heavy duty inverter system with a duty cycle of 60% in a 40 C ambient with 100AMP output, is specifically designed for a high level applications requiring superior endurance and cutting performance.
HF or Non-HF pilot arc start system can be easily switched.
Important functions & device information at a glance
♦ Pilot Arc for superior arc performance and easy start. HF or Non-HF Arc.
♦ HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.
♦ Continuous Output Control: focus the arc for different material thickness.
♦ Rapid Arc Restrike: fast cutting through gaps, even expanded metal.
♦ Powerful with heavy duty: 100A @60%.
♦ Recommended 30mm quality cut capacity (0.5 m/min, with optional torch).
♦ Generator power supply friendly.
|Power Source Dimensions||L540mmxW270mmxH450mm|
|Welder Type||Inverter Power Source|
|European Standards||EN 60974-1 / IEC 60974-1|
|Number of Phases||3|
|Nominal Supply Voltage||230V +/- 15%|
|Nominal Supply Frequency||50/60Hz|
|Welding Current Range (CUT Mode)||20 - 100A|
|Effective Input Current /STICK /TIG||17A|
|Maximum Input Current/STICK/ TIG||21.9A|
|Single Phase Generator Requirement||20KVA|
|WeldingOutput,40oC,10min.||100A @ 60%, 120V / 77.5A @ 100%, 111V|
|Open circuit voltage||260-330V DC|