Your position: Home > AC/DC TIG + CUT > VECTOR Digital Welding machine AC/DC TIG O251 Plus Inverter ALU TIG CUT ARC MMA STICK Electrode

Descript of VECTOR Digital Welding machine AC/DC TIG O251 Plus Inverter ALU TIG CUT ARC MMA STICK Electrode

A total solution of precise AC/DC TIG PLUS welding and plasma cutting machine.

O251 built base on the Mastertig System offers precise, expert AC/DC TIG welding process. It’s a precise aluminum welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs.

O251 also comes with a 50A@60 heavy duty cycle plasma cutting power source. What you need for any metal welding or cutting works, you just get this combo machine and it’s all you needs.For TIG and Stick Welding.Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It’s also very convenient to store or call out the welding parameters from the memory channels.


Important functions & device information at a glance

Precision Arc Performance:

♦ DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.

♦ Lift-Arc start provides AC or DC arc starting without the use of high frequency.

♦ Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.

♦ Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.

♦ Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.

♦ Multiple Waveshapes:

♦ Standard Squarewave for fast travel speeds and excellent puddle control,Sine wave for a traditional softer sounding arc,Triangular wave to reduce the heat input into the weld at low amperage.Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action.

♦ Pilot Arc for superior arc performance and easy start.

♦ HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.

♦ Continuous Output Control: focus the arc for different material thickness.

♦ Rapid Arc Restrike: fast cutting through gaps, even expanded metal.

♦ Powerful with heavy duty: 200A @50%.

♦ 10 channels memory capacity


Technical specifications
Weight31 kg
Power Source DimensionsL540mmxW270mmxH450mm
CoolingFan Cooled
Welder TypeInverter Power Source
European StandardsEN 60974-1 / IEC 60974-1
Number of Phases1
Nominal Supply Voltage230V +/- 15%
Nominal Supply Frequency50/60Hz
Welding Current Range ( STICK Mode)10 - 200A
Welding Current Range ( TIG Mode)10 - 200A
Welding Current Range (CUT Mode)10 - 40A
Effective Input Current /STICK /TIG20.8A
Maximum Input Current/STICK/ TIG41.6A
Single Phase Generator Requirement12.1KVA
STICK (MMA) Welding Output, 40oC, 10 min.200A @ 25%, 28V
141A @ 50%, 25.6V
110A @ 100%, 24.4V
TIG (GTAW) Welding Output, 40oC, 10 min.200A @ 25%, 18V
141A @ 50%, 15.6V
110A @ 100%, 14.4V
Welding Output, 40oC, 10 min.40A @ 60%, 96V
31A @ 100%, 92.4V
Open circuit voltage70.0-80.0V DC
Protection ClassIP23S

Scope of delivery
TIG accessoriesTIG welding torch "WP-26" 4.5 meters
4 gas nozzles.Sizes: 4, 5, 6, 7
4 clamping sleeves.Size 1.6 and 2.4
4 clamping sleeve housing.Size 1.6 and 2.4
Torch cap - one short and one long each
CUT accessoriesPlasma torch "AG-60" 4.50 meters
5 plasma nozzles AG60
5 plasma electrodes AG60
3 ceramic caps AG60
* 1 set Pre-assembled on plasma torch
miscellaneousWater separator with pressure gauge
Gas fabric connection hose: 3 m
Ground cable 3 meters
Electrode holder 3 meters

Other devices from this product category