Your position: Home > Product center > AC/DC TIG

SWIM London 2400 Kombi Welder AC/DC WIG 200 Plus TIG ALU MMA E-Hand Inverter 4 in1


Digital Professional Welding Machine with Job Storage:

- DC / AC TIG welding,

- AC - aluminum welding,

- TIG pulse function - pulse welding,

- MMA / ARC electrode hand welding,

- Thin sheet + ALU suitable

Descript of SWIM London 2400 Kombi Welder AC/DC WIG 200 Plus TIG ALU MMA E-Hand Inverter 4 in1

A total solution of precise AC/DC TIG PLUS welding and plasma cutting machine.

AC/DC London2400 is built on the base of the digital system, which offers precise, expert AC/DC TIG welding process. It?s a precise welding specialist that suits all welded materials. Modular design allows you to build the package that best suits your needs. Easy operation and full functions: From the control panel allowing fast adjustment of all necessary controls for DC, AC TIG welding with either HF or contact ignition. It?s also very convenient to store or call out the welding parameters from the memory channels by pressing the Job and Save button.


Important functions & device information at a glance

Precision Arc Performance:

♦ DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.

♦ Lift-Arc start provides AC or DC arc starting without the use of high frequency.

♦ Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.

♦ Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.

♦ Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.

♦ Multiple Waveshapes:

♦ Standard Squarewave for fast travel speeds and excellent puddle control,Sine wave for a traditional softer sounding arc,Triangular wave to reduce the heat input into the weld at low amperage.Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action.

♦ Pilot Arc for superior arc performance and easy start.

♦ HF or Non-HF Arc ignition: reliable plasma arc initiation without high frequency.

♦ Continuous Output Control: focus the arc for different material thickness.

♦ Rapid Arc Restrike: fast cutting through gaps, even expanded metal.

♦ Powerful with heavy duty: 200A @50%.

♦ 10 channels memory capacity.


Technical specifications

Weight11 kg
Power Source DimensionsH590mmxW270mmxD450mm
CoolingFan Cooled
Welder TypeInverter Power Source
European StandardsEN 60974-1 / IEC 60974-1
Number of Phases1
Nominal Supply Voltage230V +/- 15%
Nominal Supply Frequency50/60Hz
Welding Current Range (DC STICK Mode)10-170A
Welding Current Range (DC TIG Mode)10-200A
Effective Input Current /STICK /TIG15.4A
Maximum Input Current/STICK/ TIG30.9A
Single Phase Generator Requirement10KVA
STICK (MMA) Welding Output, 40oC, 10 min.170A @ 50%, 26.8V / 85A @ 100%, 23.4V
TIG (GTAW) Welding Output, 40oC, 10 min.200A @ 40%, 18V / 126A @ 100%, 15V
Open circuit voltage60.0V DC
Protection ClassIP23


Other devices from this product category